How To Change A Garage Door Spring

Garage door springs are an essential part of your garage door system. They help to lift and lower the door smoothly and safely. Over time, however, springs can wear out and need to be replaced. If you're experiencing problems with your garage door, it's important to inspect the springs to see if they need to be replaced.

### Here's a step-by-step guide on how to change a garage door spring:

1. Gather your tools and materials.

* New garage door spring * Socket wrench or impact wrench * Screwdriver * Safety glasses * Gloves

2. Safety first!

* Before you begin, make sure to disconnect the power to your garage door opener. * Wear safety glasses and gloves to protect yourself from flying debris.

3. Identify the type of spring.

* There are two main types of garage door springs: extension springs and torsion springs. Extension springs are located above the door, while torsion springs are located above the door opening.

4. Remove the old spring.

* If you're replacing an extension spring, simply unhook it from the door and remove it. * If you're replacing a torsion spring, you'll need to use a socket wrench or impact wrench to remove the bolts that hold it in place.

5. Install the new spring.

* If you're installing an extension spring, simply hook it onto the door and connect it to the opener. * If you're installing a torsion spring, you'll need to use a socket wrench or impact wrench to tighten the bolts that hold it in place.

6. Adjust the tension.

* Once the new spring is installed, you'll need to adjust the tension to ensure that the door opens and closes smoothly. * To adjust the tension on an extension spring, simply turn the eyebolt until the desired tension is achieved. * To adjust the tension on a torsion spring, you'll need to use a winding bar to wind up the spring until the desired tension is achieved.

7. Test the door.

* Once the tension is adjusted, test the door to make sure that it opens and closes smoothly. * If the door is not opening or closing properly, you may need to adjust the tension further.

8. Reconnect the power.

* Once you're satisfied with the operation of the door, reconnect the power to your garage door opener.

Tips:

* If you're not comfortable changing a garage door spring yourself, it's best to hire a professional. * Replacing a garage door spring can be a dangerous job, so it's important to take all necessary safety precautions. * If you have any questions or concerns, please consult a qualified garage door technician.