Garage Door Opens But Does Not Close With Remote

Garage Door Opens But Does Not Close With Remote

If your garage door opens but does not close with the remote, there are several possible causes. Troubleshooting the issue can be frustrating, but by following a systematic approach, you can usually identify and fix the problem quickly.

1. Check the Batteries in the Remote

The most common cause of a garage door opener not closing is dead or weak batteries in the remote. Replace the batteries with new ones and try again. Some remotes use lithium batteries and others use alkaline batteries so be sure to use the correct type of battery.

2. Check the Wiring

Loose or damaged wiring can also prevent the garage door from closing. Locate the connections between the opener motor and the wall-mounted control panel. Make sure the wires are securely connected and that there is no damage to the insulation. Also, check the wiring between the motor and the safety sensors.

3. Check the Safety Sensors

The safety sensors are designed to prevent the garage door from closing if something is obstructing its path. If the sensors are misaligned or dirty, it can cause the door to open but not close. Check the sensors for any obstructions and clean them with a soft cloth. Make sure the sensors are aligned with each other and that the LED lights on the sensors are both lit.

4. Reset the Opener

Resetting the garage door opener can sometimes fix a problem with the remote. Locate the reset button on the opener motor. It is usually a small, recessed button. Press and hold the reset button for about 5 seconds. The opener will beep and the lights will flash. Release the button and wait for the opener to reinitialize.

5. Check the Remote Code

If you have recently changed the code on your remote, it is possible that the new code is not programmed correctly. Refer to the user manual for your garage door opener to find the instructions on how to reprogram the remote.

6. Check the Motor

If the motor is not working properly, it will not be able to close the garage door. Check the motor for any signs of damage or overheating. If the motor is making a grinding noise, it is likely that it needs to be replaced. It is always recommended to call a qualified garage door technician to work on the motor.

7. Other Considerations

If you have tried all of the above steps and the garage door still does not close with the remote, there may be another issue. Check the following:

• Make sure the door is not obstructed by anything.
• Check the limit switches on the opener. They may need to be adjusted.
• Check the logic board on the opener. It may be malfunctioning.

If you are not comfortable working on your garage door opener, it is best to call a qualified technician for assistance.

Craftsman Garage Door Opens But Won T Close Not Closing Fix Replace Main Circuit Board

12 Reasons A Garage Door Won T Close Mesa Doors

Garage Door Remote Won T Open Close Most Common Causes

Easy Fix Garage Door Remote Not Working

Garage Door Won T Open Or Close Reasons And Solutions

Garage Door Won T Open Or Close Reasons And Solutions

Garage Door Won T Close Homepro Inspections

Garage Door Remote Not Working 5 Most Common Reasons Why Youtube

3 Reasons Your Garage Door Won T Close

8 Reasons Why Your Garage Door Won T Close Uplift