Craftsman Garage Door Opener Programming

Craftsman garage door openers are a popular choice for homeowners because they offer a variety of features and are relatively easy to program. If you need to program your Craftsman garage door opener, follow these steps:

1. Gather your materials. You will need the following items:

Craftsman garage door opener
Remote control
Stepladder
Phillips head screwdriver

2. Locate the programming button. The programming button is usually located on the back of the motor unit of the garage door opener. It is a small, black button with an arrow pointing to it.

3. Press and hold the programming button. Hold the programming button for 5 seconds until the LED light on the motor unit starts to flash.

4. Press the button on the remote control. Press the button on the remote control that you want to program. The LED light on the motor unit will flash once to indicate that the remote control has been programmed.

5. Repeat steps 3 and 4 for each remote control. If you have multiple remote controls, you need to program each of them one at a time.

6. Test the remote controls. Once you have programmed all of the remote controls, test them to make sure they are working properly. Press the button on each remote control and make sure that the garage door opens and closes properly.

7. Store the remote controls. Once you have tested the remote controls, store them in a safe place. You may want to keep one remote control in your car and one in your house.

Troubleshooting

If you have any problems programming your Craftsman garage door opener, follow these troubleshooting tips:

Make sure that the batteries in the remote control are fresh.
Make sure that the programming button is being pressed for 5 seconds.
Make sure that the button on the remote control is being pressed immediately after the programming button is pressed.
If you are still having problems, you may need to reset the garage door opener. To reset the garage door opener, disconnect the power to the unit for 30 seconds and then reconnect the power.

If you have any other questions about programming your Craftsman garage door opener, please consult the user manual or contact Craftsman customer service.