Genie Pro Max Garage Door Opener Programming

The Genie Pro Max garage door opener is a smart and reliable device that offers advanced features for added convenience and security. Programming the Genie Pro Max is a straightforward process that can be easily completed by following these step-by-step instructions.

Materials Required

* Genie Pro Max garage door opener * Remote control or keypad * Ladder (optional)

Safety Precautions

* Disconnect the power to the garage door opener before starting any programming. * Use caution when working near electrical components. * Keep children and pets away from the work area.

Step-by-Step Programming Instructions

**1. Access the Learn Button** * Locate the "Learn" button on the motor unit of the garage door opener. It is usually a small, black button with an LED light. * Press and hold the "Learn" button for 5 seconds until the LED light starts blinking. **2. Program the Remote Control** * Hold the remote control facing the motor unit, about 2 feet away. * Press and hold the desired button on the remote control until the LED light on the motor unit glows solid. * Release the remote control button. **3. Program the Keypad** * If your Genie Pro Max opener has a keypad, locate the "Prog" button. * Press and hold the "Prog" button for 2 seconds. The LED light will start blinking. * Enter a four-digit PIN code using the keypad. * Press the "Enter" button. The LED light will glow solid. * Enter the PIN code again. If successful, the LED light will blink once. * Press the desired button on the keypad to assign it to a door. **4. Program Additional Devices** * To program additional remote controls or keypads, repeat steps 2 or 3 as needed. * Each device can be programmed to operate a specific door or multiple doors. **5. Test the Operation** * After programming, test the operation of the garage door opener. * Use the remote control or keypad to open and close the door. * Ensure that the door opens and closes smoothly without any obstructions. **6. Restore Factory Settings (Optional)** * If you encounter any issues or need to reset the Genie Pro Max opener to its factory settings, follow these steps: * Press and hold the "Learn" and "Light" buttons on the motor unit simultaneously for 10 seconds. * The LED light will flash rapidly for a few seconds, indicating that the factory settings have been restored. **7. Additional Notes** * The Genie Pro Max garage door opener can store up to 50 remote controls or keypads. * You can delete a programmed device by pressing and holding the corresponding button on the remote control or keypad for 10 seconds. * If you face any difficulties during programming, refer to the user manual or contact Genie technical support for assistance.