Garage Door Sensor Light Is Orange

If your garage door sensor light is orange, it typically indicates a problem with the alignment of the safety sensors. These sensors are designed to detect obstructions when the door is closing, preventing it from closing completely and potentially causing damage to your vehicle or property. When the sensors are misaligned, they cannot detect the presence of an obstruction, resulting in the orange light.

Here are some possible reasons why your garage door sensor light might be orange:

Obstruction in the sensor's path: There could be an object or debris blocking the line of sight between the two sensors. This could be something as small as a piece of paper or a cobweb.
Misaligned sensors: The sensors may have been knocked out of alignment due to an impact or vibration. This can happen if the door was hit by a vehicle or if there was a strong windstorm.
Damaged or faulty sensors: One or both of the sensors may have been damaged or become faulty over time. This could be due to exposure to moisture, corrosion, or other factors.

To resolve the issue and get your garage door sensor light back to green, you will need to identify and address the underlying problem. Here are some steps you can follow:

Check for obstructions: Start by checking the path between the two sensors to ensure there are no obstructions. Remove any objects or debris that may be blocking the line of sight.
Inspect the sensors: Once the path is clear, inspect the sensors for any damage or misalignment. Look for any cracks, breaks, or loose connections.
Realign the sensors: If the sensors appear to be misaligned, you will need to adjust their position. Use a screwdriver to loosen the mounting screws and gently move the sensors until they are facing each other directly.
Test the sensors: Once the sensors are aligned, test them by placing an object in the path of the door as it closes. The door should stop and the sensor light should turn green.
Inspect the wiring: If the sensor light remains orange after realignment, check the wiring connections to both sensors. Ensure that the wires are properly connected and there are no loose or damaged wires.
Replace the sensors: If all else fails, you may need to replace the sensors. This is a relatively simple task that can be done by most homeowners with basic DIY skills.

By following these steps, you can get your garage door sensor light back to green and ensure that your garage door is operating safely.