Chamberlain Garage Door Reset Keypad

Chamberlain garage door keypads provide convenient access to your home without the need for a key or remote control. However, if your keypad is malfunctioning or you need to reprogram it, you can easily reset it using the following steps:

1. Locate the reset button: The reset button is usually located on the back or bottom of the keypad. It may be covered by a small rubber cap.

2. Press and hold the reset button: Use a small screwdriver or pen to press and hold the reset button for 5-10 seconds. You should hear a beep or see the keypad lights flashing to indicate that the reset is complete.

3. Release the reset button: Once the reset is complete, release the button.

4. Reprogram the keypad (optional): If you need to reprogram the keypad, follow the instructions in the user manual or contact Chamberlain customer support.

Additional tips:
- If the reset button is not accessible, you may need to remove the keypad from the wall to access it.
- If you have lost your user manual, you can download a copy from Chamberlain's website.
- If you are still having problems resetting your keypad, contact Chamberlain customer support for assistance.
- Resetting the keypad will erase all programmed codes, so be sure to reprogram it with the desired codes after resetting.

By following these steps, you can easily reset your Chamberlain garage door keypad and restore its proper functionality. If you encounter any difficulties or have additional questions, do not hesitate to consult the user manual or contact Chamberlain customer support.