Broken Cable On Garage Door

A broken cable on a garage door is a common problem that can be easily fixed with a few simple tools. The cables are responsible for lifting and lowering the door, so when one breaks, the door will become stuck. If you have a broken cable on your garage door, it is important to fix it as soon as possible to avoid further damage to the door or the opener.

To replace a broken cable, you will need the following tools:

A new cable
A pair of pliers
A screwdriver
A ladder
A helper

Once you have gathered your tools, you can begin the repair process.

1. Safety first: Before you start working on the garage door, be sure to disconnect the power to the opener. This will prevent the door from opening or closing while you are working on it.

2. Remove the old cable: Once the power is disconnected, you can remove the old cable. To do this, simply use the pliers to cut the cable at the bottom of the door. Then, use the screwdriver to remove the screws that hold the cable in place at the top of the door.

3. Install the new cable: Once the old cable is removed, you can install the new cable. To do this, simply follow the steps in reverse. First, attach the new cable to the top of the door using the screws. Then, run the cable through the pulleys at the bottom of the door and secure it with the pliers.

4. Reconnect the power: Once the new cable is installed, you can reconnect the power to the opener. To do this, simply plug the opener back into the outlet.

5. Test the door: Once the power is reconnected, you can test the door to make sure that it is working properly. To do this, simply press the button on the opener and watch the door open and close.

If the door is working properly, then you have successfully replaced the broken cable. If the door is still not working properly, then you may need to call a qualified technician for assistance.