How To Program Genie Garage Door Opener Intellicode

Programming a Genie Intellicode garage door opener is a simple process that can be completed in a few minutes. By following these step-by-step instructions, you can easily program your opener to work with your Genie Intellicode remote control.

Step 1: Gather your materials.

You will need the following materials to program your Genie Intellicode garage door opener:

Genie Intellicode garage door opener
Genie Intellicode remote control
Ladder
Phillips head screwdriver

Step 2: Locate the programming button.

The programming button is usually located on the back of the garage door opener motor unit. It is a small, black button that is labeled "Prog" or "Program." If you cannot find the programming button, consult your garage door opener's user manual.

Step 3: Press and hold the programming button.

Press and hold the programming button for 5 seconds. The LED light on the back of the garage door opener will begin to flash. This indicates that the opener is in programming mode.

Step 4: Press the button on the remote control.

Press the button on the Genie Intellicode remote control that you want to program. The LED light on the back of the garage door opener will stop flashing and turn solid. This indicates that the remote control has been successfully programmed.

Step 5: Repeat steps 3 and 4 for additional remotes.

If you want to program additional Genie Intellicode remote controls, repeat steps 3 and 4 for each remote.

Step 6: Test the remote control.

Once you have programmed all of the remote controls, test them to make sure that they are working properly. Press the button on each remote and verify that the garage door opens and closes correctly.

Step 7: Store the remote controls in a safe place.

Store the Genie Intellicode remote controls in a safe place where they will not be lost or stolen. If a remote control is lost or stolen, it is important to reprogram the garage door opener to prevent unauthorized access.