Genie Intellicode Garage Door Opener Manual

The Genie Intellicode garage door opener is a convenient and secure way to open and close your garage door. With its rolling code technology, the Intellicode opener prevents unauthorized access to your home. This manual will provide you with step-by-step instructions on how to install and program your Genie Intellicode garage door opener.

Installation

1. Gather the necessary tools, including a ladder, drill, screwdriver, and safety glasses. 2. Choose a mounting location for the opener on the ceiling of your garage. The opener should be mounted at least 7 feet above the ground and centered over the garage door. 3. Mark the mounting holes and drill pilot holes. 4. Insert the lag bolts into the pilot holes and tighten them securely. 5. Hang the opener on the mounting brackets. 6. Connect the power wires to the opener's terminals. 7. Connect the control wires to the opener's terminals. 8. Mount the remote control receiver on the wall near the garage door. 9. Connect the antenna wire to the receiver. 10. Test the opener by pressing the button on the remote control.

Programming

1. Press and hold the "Program" button on the opener until the LED light starts flashing. 2. Press and hold the button on the remote control until the LED light stops flashing. 3. Repeat step 2 for each additional remote control you want to program. 4. Press the "Program" button again to exit programming mode.

Troubleshooting

If the opener does not work properly, try the following troubleshooting tips: 1. Check that the power is connected to the opener. 2. Check that the control wires are connected properly. 3. Check that the remote control batteries are fresh. 4. Reset the opener by pressing and holding the "Program" button for 10 seconds. 5. If the opener still does not work, contact a qualified electrician.

Safety Precautions

When using your Genie Intellicode garage door opener, always follow these safety precautions: 1. Keep the remote control out of the reach of children. 2. Never open the garage door when someone is standing under it. 3. Keep the garage door closed when not in use. 4. If the opener is not working properly, do not attempt to repair it yourself. Contact a qualified electrician.