How To Install Garage Springs

Replacing garage springs is a job that requires caution and a good understanding of how the springs work. This is not a task for beginners. If you are not comfortable working with springs or do not have the proper tools, it is best to hire a professional.

Garage springs are under a lot of tension and can be dangerous if not handled properly. Before you begin, make sure you have all of the necessary tools and safety gear. You will need a pair of safety glasses, a pair of work gloves, a socket wrench, a drill, a screwdriver, and a crowbar.

Once you have gathered your tools, you need to prepare the garage door for the new springs. Start by disconnecting the door from the opener. Then, remove the old springs by carefully following the instructions that came with the new springs. Be sure to wear safety glasses and gloves when working with the springs.

Once the old springs are removed, you can begin installing the new springs. Start by attaching the springs to the door frame. Then, attach the other end of the springs to the torsion bar. Be sure to follow the instructions that came with the springs to ensure that they are installed correctly.

Once the springs are installed, you can reconnect the door to the opener. Then, test the door to make sure it is working properly. If the door does not open or close properly, you may need to adjust the springs.

If you are not confident in your ability to install garage springs safely, it is best to hire a professional. Garage springs are under a lot of tension and can be dangerous if not handled properly.

Safety Precautions

When working with garage springs, it is important to take the following safety precautions:

Wear safety glasses and gloves.
Do not work alone.
Make sure the garage door is disconnected from the opener.
Be careful not to overtighten the springs.
If you are not confident in your ability to install garage springs safely, hire a professional.