How To Fix Garage Door Cables

Garage door cables are an essential part of the door's operation. They connect the door to the opener and allow it to open and close smoothly. When a cable breaks, it can cause the door to become inoperable. In this article, we will show you how to fix garage door cables so that you can get your door working again as soon as possible.

Safety First

Before you begin working on your garage door cables, it is important to take some safety precautions.

Disconnect the power to the garage door opener. This will prevent the door from opening or closing while you are working on it.
Wear gloves and safety glasses to protect yourself from sharp edges.
Do not attempt to fix a broken cable if you are not comfortable working with tools.

Tools You Will Need

To fix garage door cables, you will need the following tools:

Wrench
Pliers
Measuring tape
Replacement cable

Step-by-Step Instructions

Follow these step-by-step instructions to fix garage door cables:

Locate the broken cable. The broken cable will be hanging down from the door.
Use a wrench to loosen the bolts that hold the cable to the door.
Remove the broken cable from the door.
Measure the length of the broken cable.
Cut a new cable to the same length as the broken cable.
Attach the new cable to the door.
Tighten the bolts that hold the cable to the door.
Reconnect the power to the garage door opener.
Test the garage door to make sure it is working properly.

Tips

Here are a few tips for fixing garage door cables:

If you are not sure how to fix a broken cable, it is best to call a professional.
Do not use a cable that is too short or too long.
Make sure that the cable is properly attached to the door.