How Do You Measure A Garage Door

How Do You Measure A Garage Door?

Measuring a garage door correctly is essential for ensuring that you order and install the right size door for your garage. Here's a step-by-step guide on how to measure a garage door:

1. Determine the Type of Garage Door You Have

There are two main types of garage doors: sectional and one-piece. Sectional doors are made up of several panels that fold up and down, while one-piece doors are a single, solid panel. The measurement process will vary slightly depending on the type of door you have.

2. Measure the Width of the Garage Door Opening

Measure the width of the garage door opening from the inside of the garage, between the jambs. For a sectional door, measure from the inside edge of one jamb to the inside edge of the other jamb. For a one-piece door, measure from the outside edge of one jamb to the outside edge of the other jamb.

3. Measure the Height of the Garage Door Opening

Measure the height of the garage door opening from the floor to the top of the header. For a sectional door, measure from the top of the bottom panel to the top of the header. For a one-piece door, measure from the bottom of the door to the top of the header.

4. Measure the Depth of the Garage

Measure the depth of the garage from the back wall to the inside edge of the garage door opening. This measurement is important for determining the headroom you have for the door.

5. Measure the Back Clearance

Measure the distance from the back of the garage door to the nearest obstruction, such as a wall or ceiling beam. This measurement is important for determining the track length you need for the door.

6. Measure the Side Clearance

Measure the distance from the side of the garage door to the nearest obstruction, such as a wall or window. This measurement is important for determining the width of the door you can install.

7. Double-Check Your Measurements

Once you have taken all of the measurements, double-check them to ensure they are accurate. It's always better to take multiple measurements and get an average to ensure you have the correct dimensions.