Chamberlain Smart Garage Control Installation

Chamberlain Smart Garage Control is a smart home device that allows you to control your garage door from anywhere using your smartphone. It is a convenient and secure way to open and close your garage door, and it can also be used to receive notifications when your garage door is opened or closed.

Installing a Chamberlain Smart Garage Control is a relatively simple process that can be completed in about an hour. The following steps will guide you through the installation process:

1. Gather Your Tools and Materials

Before you begin, you will need to gather the following tools and materials:

Chamberlain Smart Garage Control
Screwdriver
Drill
1/2-inch drill bit
Electrical tape
Wire nuts

2. Turn Off the Power to Your Garage Door Opener

Before you begin working on your garage door opener, it is important to turn off the power to the unit. This will help to prevent any electrical accidents.

3. Remove the Old Garage Door Opener Control Panel

Once the power is off, you can remove the old garage door opener control panel. To do this, simply unscrew the screws that are holding the panel in place and then pull the panel off of the wall.

4. Install the New Control Panel

Now you can install the new Chamberlain Smart Garage Control. To do this, simply line up the new control panel with the holes in the wall and then screw the panel into place.

5. Connect the Wires

Next, you will need to connect the wires from the new control panel to the wires from your garage door opener. To do this, simply match the colors of the wires and then twist the wires together. Once the wires are twisted together, you can secure them with electrical tape. You will also need to wire in the two "learn" button wires.

6. Test the New Control Panel

Once the wires are connected, you can test the new control panel. To do this, simply press the "open" button on the control panel. If the garage door opens, then the control panel is working properly. If the garage door does not open, then you will need to check the wiring to make sure that it is correct.

7. Download the Chamberlain MyQ App

Once the new control panel is installed and working properly, you can download the Chamberlain MyQ app to your smartphone. This app will allow you to control your garage door from anywhere using your smartphone. To download the app, simply go to the App Store or Google Play and search for "Chamberlain MyQ".

Once you have downloaded the app, you can create an account and then add your garage door to the app. Once your garage door is added to the app, you will be able to control it from anywhere using your smartphone.