Chamberlain Garage Door Openers Learn Button

The Chamberlain Garage Door Openers Learn Button is a small, black button located on the back of the motor unit. It is used to program the opener to recognize the remote controls or keypads that you will be using to operate the door. The Learn Button is easy to use and typically only takes a few seconds to program the opener.

How to Program the Chamberlain Garage Door Openers Learn Button

To program the Chamberlain Garage Door Openers Learn Button, follow these steps:

Locate the Learn Button on the back of the motor unit.
Press and hold the Learn Button until the LED light on the opener begins to flash.
Within 30 seconds, press the button on the remote control or keypad that you want to program.
The LED light on the opener will stop flashing and turn solid, indicating that the remote control or keypad has been successfully programmed.

You can program up to four remote controls or keypads to a single Chamberlain Garage Door Opener.

Troubleshooting the Chamberlain Garage Door Openers Learn Button

If you are having trouble programming the Chamberlain Garage Door Openers Learn Button, try the following troubleshooting tips:

Make sure that the batteries in the remote control or keypad are fresh.
Make sure that the Learn Button is being pressed and held for at least two seconds.
Make sure that the remote control or keypad is being pressed within 30 seconds of pressing the Learn Button.
Try reprogramming the remote control or keypad from a closer distance to the opener.
If you are still having trouble, you can contact Chamberlain customer service for assistance.

Conclusion

The Chamberlain Garage Door Openers Learn Button is a convenient and easy-to-use way to program your garage door opener to work with your remote controls and keypads. By following the steps outlined in this article, you can quickly and easily program your opener to work with your desired accessories.