Replacement Springs For Garage Doors

Garage door springs are an important part of the garage door system, as they help to lift and lower the heavy door. Over time, however, these springs can wear out or break, which can make it difficult or impossible to open or close the door. If you find yourself in this situation, you will need to replace the springs. Here are a few things to keep in mind when replacing garage door springs:

There are two main types of garage door springs: torsion springs and extension springs. Torsion springs are located above the door and are wound around a metal shaft. Extension springs are located on either side of the door and are attached to the door frame and the spring anchor. The type of spring that you need will depend on the type of garage door that you have.

Garage door springs are under a lot of tension, so it is important to take safety precautions when replacing them. Always wear gloves and safety glasses, and make sure that the door is properly supported before you begin working on it. It is also a good idea to have someone help you with this task.

To replace a torsion spring, you will need to remove the old spring and then install the new spring in its place. To remove the old spring, you will need to loosen the set screws that are located on either side of the spring. Once the set screws are loose, you can use a pair of pliers to remove the spring from the shaft. To install the new spring, you will need to reverse the process. First, place the new spring on the shaft and then tighten the set screws.

To replace an extension spring, you will need to remove the old spring and then install the new spring in its place. To remove the old spring, you will need to detach the spring from the door frame and the spring anchor. Once the spring is detached, you can remove it from the garage door. To install the new spring, you will need to reverse the process. First, attach the new spring to the door frame and spring anchor. Then, you will need to attach the spring to the door.

Replacing garage door springs can be a challenging task, but it is one that can be completed by most do-it-yourselfers. If you are not comfortable working on garage door springs, however, it is best to call a qualified professional to do the job for you.

Here are some additional tips for replacing garage door springs:

Always use the correct size and type of spring for your garage door.

Make sure that the springs are properly tensioned.

Lubricate the springs regularly to keep them in good working condition.

Inspect the springs regularly for signs of wear or damage.

Replace the springs as soon as they start to show signs of wear or damage.