Craftsman Reprogram Garage Door Opener

A Craftsman garage door opener is a convenient and efficient way to open and close your garage door. However, if you need to reprogram the opener, it's important to follow the correct steps to ensure it works properly. Here's a detailed guide on how to reprogram a Craftsman garage door opener:

Step 1: Gather Necessary Materials

Craftsman garage door opener
Remote control(s)
Ladder (optional)

Step 2: Locate the Learn Button

The learn button is usually located on the back or side of the garage door opener motor unit.
If you can't find the learn button, refer to your garage door opener's manual.

Step 3: Press the Learn Button

Press and hold the learn button for 2-5 seconds until the LED light starts flashing.
Once the light is flashing, you have entered programming mode.

Step 4: Program Remote Controls

Press the button on the remote control you want to program.
Hold the button down until the LED light on the garage door opener stops flashing.
Repeat for any additional remote controls you need to program.

Step 5: Exit Programming Mode

Press and hold the learn button again for 2-5 seconds.
The LED light will turn off, indicating that you have exited programming mode.

Step 6: Test Garage Door Opener

Press the button on the remote control to open and close the garage door.
Ensure that the door operates smoothly and responds correctly to the remote control.

Additional Tips:

If the LED light does not flash when you press the learn button, check the battery in your remote control.
If you are still having trouble programming your garage door opener, refer to your manual or contact a professional.
To erase all programmed remotes, press and hold the learn button for 10 seconds.