How To Program Chamberlain Garage Door Remote

How to Program Chamberlain Garage Door Remote

Chamberlain garage door openers are a popular choice for homeowners due to their reliability and durability. If you need to program a new remote for your Chamberlain garage door opener, follow these step-by-step instructions. The programming process is simple and can be completed in just a few minutes.

Step 1: Gather Your Materials

You will need the following materials to program a Chamberlain garage door remote:

Chamberlain garage door opener
New Chamberlain garage door remote
Ladder (if necessary)

Step 2: Locate the Learn Button

The Learn button is located on the back of the motor unit or inside the garage door opener housing. It is usually a small, round button that is labeled "Learn" or "Program."
If you have a newer Chamberlain garage door opener, the Learn button may be located on the side of the motor unit. Consult your garage door opener manual for specific instructions.

Step 3: Put the Garage Door Opener into Programming Mode

To put the garage door opener into programming mode, press and hold the Learn button for 3 seconds. The LED light on the opener will begin to flash.

Step 4: Activate the New Remote

Within 30 seconds of putting the opener into programming mode, press and hold the button on the new remote that you want to program. Hold the button down until the LED light on the opener stops flashing and stays lit.

Step 5: Test the Remote

Once the remote is programmed, press the button to open and close the garage door. If the door opens and closes properly, the remote has been programmed successfully.

Step 6: Repeat for Additional Remotes

If you need to program additional remotes, repeat steps 3-5 for each remote.

Tips

If you have trouble programming the remote, try replacing the battery in the remote.
If you are still having trouble, consult your garage door opener manual or contact Chamberlain customer service for assistance.

Conclusion

Programming a Chamberlain garage door remote is a simple process that can be completed in just a few minutes. By following these instructions, you can easily add a new remote to your garage door opener and control your garage door from afar.