How To Program Chamberlain Garage Opener

How to Program Chamberlain Garage Opener

Chamberlain garage door openers are equipped with a user-friendly programming process that allows homeowners to easily add, delete, or reprogram remotes and keypads. To program a Chamberlain garage door opener, you will need the following:

A Chamberlain garage door opener
A ladder or step stool
A screwdriver
The remote or keypad you want to program

Here are the steps on how to program a Chamberlain garage door opener:

Locate the control panel. The control panel is usually located on the side or back of the garage door opener. It is a small, black box with a button labeled "Program."
Press and hold the "Program" button. The LED light on the control panel will start flashing.
Press the button on the remote or keypad. The LED light will stop flashing and the garage door will open or close.
Repeat steps 2 and 3 for any additional remotes or keypads you want to program.
To erase all programmed remotes and keypads, press and hold the "Program" button for 10 seconds. The LED light will flash rapidly and then turn off.

Tips for programming a Chamberlain garage door opener:

Make sure the remote or keypad you are programming is within range of the garage door opener.
If the LED light on the control panel does not flash when you press the "Program" button, check the batteries in the remote or keypad.
If you are having trouble programming a Chamberlain garage door opener, refer to the user manual or contact a qualified technician.