How To Program A Genie Garage Door Opener Remote

Programming a Genie garage door opener remote is a simple process that can be completed in a few minutes. By following the steps below, you can easily add a new remote to your garage door opener system.

Before you begin, you will need the following items:

A Genie garage door opener remote
The garage door opener's user manual
A ladder (if necessary)

Once you have gathered all of the necessary items, you can begin the programming process. To program a Genie garage door opener remote, follow these steps:

Locate the Learn button on the garage door opener.

The Learn button is typically located on the back of the garage door opener unit, near the motor. 2.

Press and hold the Learn button for three seconds.

The LED light on the garage door opener will begin to flash. 3.

Press and hold the button on the remote that you want to program.

The LED light on the garage door opener will stop flashing and turn solid. 4.

Release the button on the remote.

The garage door opener has now been programmed to the remote. 5.

Test the remote to make sure that it is working properly.

Press the button on the remote and the garage door should open or close.

If you are having trouble programming the remote, you can refer to the garage door opener's user manual for more detailed instructions. You can also contact Genie customer service for assistance.

Here are some additional tips for programming a Genie garage door opener remote:

Make sure that the remote is within range of the garage door opener.
If you are using a ladder to reach the Learn button, be sure to have someone hold the ladder for you.
If you are having trouble getting the remote to work, try replacing the battery. Batteries in older remotes can die over time.

By following these steps, you can easily program a Genie garage door opener remote. With a new remote, you can conveniently open and close your garage door from anywhere within range.