Liftmaster Garage Door Opener Learn Button

The Liftmaster Garage Door Opener Learn Button is a small, black button located on the motor unit of your garage door opener. It is used to program the opener to recognize and respond to the signal from your remote control. When you press the Learn Button, the opener will enter programming mode and will begin to listen for the signal from your remote.

To program your Liftmaster Garage Door Opener, you will need to follow these steps:

Press and hold the Learn Button on the motor unit.
Within 30 seconds, press the button on your remote control.
The opener will beep and the LED light will flash to indicate that the remote has been programmed.

If you are having trouble programming your Liftmaster Garage Door Opener, you can try the following troubleshooting tips:

Make sure that the batteries in your remote control are fresh.
Make sure that the Learn Button on the motor unit is not obstructed.
Try moving closer to the motor unit when programming your remote.
If you are still having trouble, you can contact Liftmaster customer support for assistance.

The Liftmaster Garage Door Opener Learn Button is a simple and convenient way to program your opener to recognize and respond to the signal from your remote control. By following the steps outlined in this article, you can easily program your opener and enjoy the convenience of remote-controlled access to your garage.

Here are some additional tips for using the Liftmaster Garage Door Opener Learn Button:

You can program up to 16 remotes to your Liftmaster Garage Door Opener.
If you lose a remote, you can easily delete it from the opener's memory by pressing and holding the Learn Button for 10 seconds.
The Liftmaster Garage Door Opener Learn Button is also used to program other accessories, such as keypads and motion sensors.

By following these tips, you can easily use the Liftmaster Garage Door Opener Learn Button to program your opener and enjoy the convenience of remote-controlled access to your garage.